PRODUCING SYNTHETIC MABLE FROM MARBLE WASTE USING CATALYST

  • Munawar Universitas Pembangunan Nasional “Veteran” Jawa Timur
Keywords: Synthetic Marble, Marble Waste, Catalist.

Abstract

This study aims to convert marble waste into synthetic marble. Marble grain size, amount (volume) of catalyst, and marble grain weight are the variables used for compressive strength, wear and air absorption. The following materials were examined: Synthetic resin 2 R-154 number three, and marble waste Acid catalyst (HCL) pH 4.5 The tools used were: A press machine that can hold up to sixty tons. 2). Utilizing Mold Machine, 4). 5 Grinding Cup for Measuring and 6). Hell Analysis. Predetermined condition variables are: 30 degrees Fahrenheit, tar 40 milliliters, 3). Check the grain size, 4, Time: four hours Here's the procedure: 1) Grain size of marble: 10, 16, 20, 35, 48) mesh, 2). Push sizes: 0.2, 0.4, 0.6, 0.8, 1.0) ml, 3). Number of marble grains: 50, 55, 60, 65, 70) grams. Accompanying boost concentrate gave the best results: Grain size of marble: Grain weight of 0.8 ml marble: 65 gram at 0.356 mm. These variables yielded the following results for compressive strength: 535 kg/cm2, wear resistance: Water absorption: 0.9439% at 0.0812 cm/min.

References

Algin, Z., & Gerginci, S. (2020). Freeze-thaw resistance and water permeability properties of roller compacted concrete produced with macro synthetic fibre. Construction and Building Materials, 234, 117382.

Ali, A., Hussain, Z., Akbar, M., Elahi, A., Bhatti, S., Imran, M., . . . Leslie Ndam, N. (2022). Influence of Marble Powder and Polypropylene Fibers on the Strength and Durability Properties of Self-Compacting Concrete (SCC). Advances in Materials Science and Engineering.

Alshahrani, H., Pathinettampadian, G., Gujba, A. K., & Prakash Vincent Rethnam, A. (2022). Effect of palmyra sprout fiber and biosilica on mechanical, wear, thermal and hydrophobic behavior of epoxy resin composite. Journal of Industrial Textiles, 52, 15280837221137382.

Aslan, A., Salur, E., Düzcükoğlu, H., Şahin, Ö. S., & Ekrem, M. (2021). The effects of harsh aging environments on the properties of neat and MWCNT reinforced epoxy resins. Construction and Building Materials, 272, 121929.

Awad, A. H., El-Gamasy, R., Abd El-Wahab, A. A., & Abdellatif, M. H. (2020). Assessment of mechanical properties of HDPE composite with addition of marble and granite dust. Ain Shams Engineering Journal, 11(4), 1211-1217.

Benjeddou, O., & Mashaan, N. (2022). Experimental study of the usability of recycling marble waste as aggregate for road construction. Sustainability, 14(6), 3195.

Dubey, S. C., Mishra, V., & Sharma, A. (2021). A review on polymer composite with waste material as reinforcement. Materials Today: Proceedings, 47, 2846-2851.

Erdogmus, E., Yaras, A., Sutcu, M., & Gencel, O. (2022). Recycling of marble cutting waste additives in fired clay brick structure: a statistical approach to process parameters. Environmental Science and Pollution Research, 29(47), 71936-71947.

Pateriya, A. S., Robert, D. J., Dharavath, K., & Soni, S. K. (2022). Stabilization of marble wastes using cement and nano materials for subgrade applications. Construction and Building Materials, 326, 126865.

Patil, A. K., Soni, K., & Soni, S. K. (2022). An experimental approach towards partial replacement of cement with marble powder. International Journal of Mechanical Engineering, 7(5), 174-181.

Ramos, V. C., Utrilla, J. R., Sánchez, A. R., Ramón, M. V., & Polo, M. S. (2021). Marble Waste Sludges as Effective Nanomaterials for Cu (II) Adsorption in Aqueous Media. Nanomaterials, 11(9), 2305.

Sufian, M., Ullah, S., Ostrowski, K. A., Ahmad, A., Zia, A., Śliwa-Wieczorek, K., . . . Awan, A. A. (2021). An experimental and empirical study on the use of waste marble powder in construction material. Materials, 14(14), 3829.

Thooyavan, Y., Kumaraswamidhas, L. A., Raj, R. E., & Binoj, J. S. (2022). Influence of SiC micro and nano particles on tribological, water absorption and mechanical properties of basalt bidirectional mat/vinyl ester composites. Composites Science and Technology, 219, 109210.

Uttaravalli, A. N., Dinda, S., & Gidla, B. R. (2020). Scientific and engineering aspects of potential applications of post-consumer (waste) expanded polystyrene: a review. Process Safety and Environmental Protection, 137, 140-148.

Zhang, Y., Yu, X., & Cheng, Z. (2022). Research on the application of synthetic polymer materials in contemporary public art. Polymers, 14(6), 1208.

Published
2022-12-27
How to Cite
Munawar. (2022). PRODUCING SYNTHETIC MABLE FROM MARBLE WASTE USING CATALYST. Journal of Community Service, 4(2), 175-184. https://doi.org/10.56670/jcs.v4i2.102